RFID hardware
RFID hardware
Avery Dennison® Monarch® Tabletop Printer 2™ in the UAE
The Avery Dennison® Monarch® Tabletop Printer 2™ is a rfid printer from Avery Dennison. It is built for reading many RFID tags at once for stock counts, asset tracking and gate reads. We supply, configure and support it across the UAE.
- Manufacturer
- Avery Dennison
- Category
- RFID hardware
Where this unit fits
- Counting stock by the pallet instead of item by item
- Tracking tools, assets and returnable containers
- Reading tags at a gate, door or conveyor without line of sight
Full specification
Taken from the manufacturer's own datasheet, with the source linked.
| Brand / Manufacturer | Avery Dennison |
|---|---|
| Device type | RFID printer |
| Print Method | Thermal Transfer or Direct Thermal print method |
| Memory | SDRAM: 64 MB Flash: 64 MB |
| Communication Interface | USB 2.0 Device Port: 1 port, B Receptacle. USB 2.0 Host Port: 2 ports, A Receptacle. RS-232C Serial Port: DB-9F, DTE pin out, 115.2K baud max communications speed. Wired Networking: 802.3u Ethernet, 10/100 Mbps, RJ-45 connector. Wireless Networking: Optional, 802.11 a/b/g/n dual band (2.4 GHz & 5 GHz), WPA2, 802.11i compliant. |
| Print Speed | 2.5 ips (64 mm/sec) - default for serial bar codes with narrow elements less than 3 dots. 4 ips (102 mm/sec) - 203 dpi serial bar codes with narrow elements of 3 dots or greater. 6.0 ips (152 mm/sec) - default for parallel bar codes , max for label peel and liner takeup. 8.0 ips (203 mm/sec) |
| Print Resolution | 203 dpi (8 dots / mm) or 300 dpi (12 dots / mm) |
| Maximum Print Width | 4.0" x 16.0" (102 mm x 406 mm) with the 203 dpi printhead. 4.0" x 13.0" (102 mm x 330 mm) with the 300 dpi printhead. Larger images (up to 16 feet) can be printed using continuous supply and reallocating memory. |
| RFID | RFID ENCODER Optional, EPCglobal UHF Class 1 Gen 2 / ISO 18000-63 (formerly 18000-6C). Supports worldwide UHF RFID frequency ranges. RFID READER Optional, Integrated post-encode-and-print reader module. Validates actual encoded data against requested data |
| Dimensions | N/A |
| Weight | N/A |
The manufacturer does not currently publish a datasheet for this model.
WhatsApp (Quickest)Common questions
- What is the Avery Dennison® Monarch® Tabletop Printer 2™ used for?
- The Avery Dennison® Monarch® Tabletop Printer 2™ is a rfid printer from Avery Dennison, used for reading many RFID tags at once for stock counts, asset tracking and gate reads. We match the exact model to your workflow before quoting.
- Do you supply and support the Avery Dennison® Monarch® Tabletop Printer 2™ across the UAE?
- Yes. We supply, configure, roll out and support it across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain. Call +971 54 707 9900 for a fixed written quote.
What buyers compare it with
RFID readers and antennas
Is the Avery Dennison® Monarch® Tabletop Printer 2™ the right fit for your site?
Send us your headcount and how many doors you need covered. We come back with the right specification and a fixed written quote, free of charge.
Request your free quote
A specialist replies within 2 working hours.