Time attendance terminal
FingerTec Face ID 2 in the UAE
The FingerTec Face ID 2 is a time attendance terminal from FingerTec, using face recognition, fingerprint, rfid card and pin or password as the credential. It stores 1,200 faces, 10,000 fingerprints and 10,000 cards on the device itself. It connects over TCP/IP, Wi-Fi, RS-485, RS-232, USB and 4G / cellular. It runs with Ingress access control software, TimeTec TA cloud over PUSH technology.
- Manufacturer
- FingerTec
- Category
- Time attendance terminal
- Credentials
- Face recognition · Fingerprint · RFID card · PIN or password
- Capacity
- 1,200 faces, 10,000 fingerprints and 10,000 cards
- Connectivity
- TCP/IP · Wi-Fi · RS-485 · RS-232 · USB · 4G / cellular
Where this unit fits
- Contactless entry where hygiene matters or hands are gloved and wet
- Large headcounts and shift changes that must clear without a queue
- Remote sites and vehicles with no fixed network to plug into
- Dual camera (standard plus high-resolution infrared) with contactless auto-detection
- Face enrolment under 30 s, face verification under 2 s, FAR under 0.01%, FRR under 0.1%
- Fingerprint verification under 1 s, FAR under 0.0001%
- 1.2 GHz processor, CE, FCC and RoHS, 2 year warranty, firmware upgradeable
Full specification
Taken from the manufacturer's own datasheet, with the source linked.
| Brand / Manufacturer | FingerTec |
|---|---|
| Device type | Face recognition, fingerprint, card and password terminal for time attendance and access control |
| Verification methods | Face, fingerprint (1:1 and 1:N), RFID card, password |
| Face capacity | 1,200 templates |
| Fingerprint capacity | 10,000 templates |
| Card capacity | 10,000 |
| Transaction log | 200,000 |
| Display | 4.3 inch 65K colour TFT touch screen, photo ID, finger or stylus input, customisable logo and multimedia slides |
| Communication | TCP/IP, RS232, RS485, USB disk (baud 9600-115200). Optional WiFi, GPRS and 3G modules |
| Access control | Wiegand 26-bit output, access control managed through Ingress software |
| Card types | RFID standard, Mifare and HID optional |
| Power supply | DC 12V / 3A with 2000 mAh Li-ion backup battery, approx. 4 hours |
| Operating temp. | 0 to 45 C, humidity 20-80% |
| Dimensions | 194 x 110 x 145 mm, ABS and acrylic housing |
| Software | Ingress access control software, TimeTec TA cloud over PUSH technology |
Where this data comes from
Every specification here is checked against the manufacturer's own document before it goes live.
Common questions
- How many employees does the FingerTec Face ID 2 hold?
- The FingerTec Face ID 2 stores up to 10,000 enrolled records on the device, with a 200,000-punch transaction log. We check your headcount and peak-minute traffic before recommending it.
- How does the FingerTec Face ID 2 connect?
- It supports TCP/IP, Wi-Fi, RS-485, RS-232, USB and 4G / cellular. In UAE installations we normally run it on wired Ethernet, with Wi-Fi kept as the fallback where cabling is impractical.
- What software runs the FingerTec Face ID 2?
- Ingress access control software, TimeTec TA cloud over PUSH technology. We connect the attendance data through to payroll and produce a WPS-ready export, so the punches become a payable file rather than a report someone has to retype.
- Do you install and support the FingerTec Face ID 2 across the UAE?
- Yes. We supply, install, configure, train your team and support it across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain. Call +971 54 707 9900 for a fixed written quote.
What buyers compare it with
Time attendance terminals
Is the FingerTec Face ID 2 the right fit for your site?
Send us your headcount and how many doors you need covered. We come back with the right specification and a fixed written quote, free of charge.
Request your free quote
A specialist replies within 2 working hours.