How many employees does the ZKTeco X7 hold?

The ZKTeco X7 stores up to 500 enrolled records on the device. We check your headcount and peak-minute traffic before recommending it.

How does the ZKTeco X7 connect?

It supports TCP/IP. In UAE installations we normally run it on wired Ethernet, with Wi-Fi kept as the fallback where cabling is impractical.

What software runs the ZKTeco X7?

None required, everything is set from the keypad. We connect the attendance data through to payroll and produce a WPS-ready export, so the punches become a payable file rather than a report someone has to retype.

Do you install and support the ZKTeco X7 across the UAE?

Yes. We supply, install, configure, train your team and support it across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain. Call +971 54 707 9900 for a fixed written quote.

Standalone door controller ZKTeco X7 standalone door controller

Standalone door controller

ZKTeco X7 in the UAE

The ZKTeco X7 is a standalone door controller from ZKTeco, using fingerprint, rfid card and pin or password as the credential. It stores 500 fingerprints and 500 cards on the device itself. It connects over TCP/IP. It runs with None required, everything is set from the keypad.

Manufacturer: ZKTeco
Category: Standalone door controller
Credentials: Fingerprint · RFID card · PIN or password
Capacity: 500 fingerprints and 500 cards
Connectivity: TCP/IP

WhatsApp (Quickest)Get a fixed written quote

Download the datasheet (PDF)435 KB

Where this unit fits

Single-door offices and small teams that need a straightforward daily record

ZKFinger V10.0 algorithm with anti-scratch optical sensor
Enrol and delete users straight from the keypad
Compact 88 mm square housing for single-gang mounting
Works with third-party lock, alarm and doorbell hardware

Full specification

Taken from the manufacturer's own datasheet, with the source linked.

Brand / Manufacturer	ZKTeco
Device type	Standalone fingerprint, RFID and password access control terminal, also usable for time attendance
Verification methods	Fingerprint, RFID card, password / PIN, and combinations
Fingerprint capacity	500
Card capacity	500
Password groups	8 groups of 4 digits
Display	No LCD. Keypad with LED and voice status feedback
Communication	Fully standalone, no PC software and no TCP/IP
Access control	Relay output NC / NO / COM (12V, 1A), third-party electric lock, alarm, door sensor, exit button, doorbell. Unlock duration 1-10 s, alarm delay 1-254 s
Card types	125 kHz and 13.56 MHz RFID
Power supply	DC 12V, approx. 500 mA in use and 50 mA standby (12V / 3A supply recommended)
Operating temp.	0 to 40 C, storage -10 to 50 C
Dimensions	88 x 88 x 33.6 mm, weight 0.14 kg
Software	None required, everything is set from the keypad

Download the datasheet (PDF)WhatsApp (Quickest)

Where this data comes from

Every specification here is checked against the manufacturer's own document before it goes live.

Common questions

How many employees does the ZKTeco X7 hold?: The ZKTeco X7 stores up to 500 enrolled records on the device. We check your headcount and peak-minute traffic before recommending it.
How does the ZKTeco X7 connect?: It supports TCP/IP. In UAE installations we normally run it on wired Ethernet, with Wi-Fi kept as the fallback where cabling is impractical.
What software runs the ZKTeco X7?: None required, everything is set from the keypad. We connect the attendance data through to payroll and produce a WPS-ready export, so the punches become a payable file rather than a report someone has to retype.
Do you install and support the ZKTeco X7 across the UAE?: Yes. We supply, install, configure, train your team and support it across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain. Call +971 54 707 9900 for a fixed written quote.