Time attendance terminal

Time attendance terminal
FingerTec H2i in the UAE
The FingerTec H2i is a time attendance terminal from FingerTec, using fingerprint and rfid card as the credential. It stores 1,500 fingerprints and 10,000 cards on the device itself. It connects over TCP/IP, RS-485, RS-232, Wiegand and USB. It runs with BioBridge VX 9.0 / VX 10.0 algorithm, Ingress and TCMS software suite.
- Manufacturer
- FingerTec
- Category
- Time attendance terminal
- Credentials
- Fingerprint · RFID card
- Capacity
- 1,500 fingerprints and 10,000 cards
- Connectivity
- TCP/IP · RS-485 · RS-232 · Wiegand · USB
Where this unit fits
- Single-door offices and small teams that need a straightforward daily record
- Slotting into an access control panel you already own
- Slim screenless design for door access, 2 fingerprints per user recommended
- 300 MHz processor, 256 MB flash plus 32 MB SDRAM
- Verification under 1 s with any-angle placement, FAR under 0.0001%
- Administrator card based enrolment for adding and removing users
- CE and FCC, 2 year warranty
Full specification
Taken from the manufacturer's own datasheet, with the source linked.
| Brand / Manufacturer | FingerTec |
|---|---|
| Device type | Screenless fingerprint door access and time attendance terminal |
| Verification methods | Fingerprint and card, minutiae-point matching |
| Fingerprint capacity | 1,500 templates |
| Card capacity | 10,000 |
| Transaction log | 100,000 |
| Display | Screenless. Multi-colour LED indicators and voice prompts. A USB numeric keypad is used for enrolment and administration |
| Communication | TCP/IP, RS232 / RS485, USB disk. Baud 9600-115200. Wiegand 26-bit input and output |
| Access control | EM lock driving output, alarm output, anti-passback, Wiegand 26-bit in and out |
| Card types | RFID 64-bit 125 kHz default. MIFARE MFIS50 / S70 13.56 MHz and HID 1326 26-bit 125 kHz customisable to order |
| Power supply | DC 12V / 3A |
| Operating temp. | 0 to 45 C, humidity 20-80% |
| Dimensions | 78 x 50 x 150 mm, ABS housing |
| Software | BioBridge VX 9.0 / VX 10.0 algorithm, Ingress and TCMS software suite |
Where this data comes from
Every specification here is checked against the manufacturer's own document before it goes live.
Common questions
- How many employees does the FingerTec H2i hold?
- The FingerTec H2i stores up to 1,500 enrolled records on the device, with a 100,000-punch transaction log. We check your headcount and peak-minute traffic before recommending it.
- How does the FingerTec H2i connect?
- It supports TCP/IP, RS-485, RS-232, Wiegand and USB. In UAE installations we normally run it on wired Ethernet, with Wi-Fi kept as the fallback where cabling is impractical.
- What software runs the FingerTec H2i?
- BioBridge VX 9.0 / VX 10.0 algorithm, Ingress and TCMS software suite. We connect the attendance data through to payroll and produce a WPS-ready export, so the punches become a payable file rather than a report someone has to retype.
- Do you install and support the FingerTec H2i across the UAE?
- Yes. We supply, install, configure, train your team and support it across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain. Call +971 54 707 9900 for a fixed written quote.
Is the FingerTec H2i the right fit for your site?
Send us your headcount and how many doors you need covered. We come back with the right specification and a fixed written quote, free of charge.
Request your free quote
A specialist replies within 2 working hours.





