Skip to main content
Time attendance terminalFingerTec Q2i time attendance terminal

Time attendance terminal

FingerTec Q2i in the UAE

The FingerTec Q2i is a time attendance terminal from FingerTec, using fingerprint, rfid card and pin or password as the credential. It stores 10,000 fingerprints and 10,000 cards on the device itself. It connects over TCP/IP, Wi-Fi, RS-485, RS-232, Wiegand, USB and 4G / cellular. It runs with Ingress / TCMS V3.

Manufacturer
FingerTec
Category
Time attendance terminal
Credentials
Fingerprint · RFID card · PIN or password
Capacity
10,000 fingerprints and 10,000 cards
Connectivity
TCP/IP · Wi-Fi · RS-485 · RS-232 · Wiegand · USB · 4G / cellular

Download the datasheet (PDF)672 KB

Where this unit fits

  • Large headcounts and shift changes that must clear without a queue
  • Remote sites and vehicles with no fixed network to plug into
  • Slotting into an access control panel you already own
  • Verification under 1 s, FAR under 0.0001%, FRR under 1%
  • Large colour TFT usable for advertising and messaging
  • Optional wireless connectivity over WiFi, GPRS or 3G
  • Pairs with the R2c slave for in / out control
  • 2 year warranty, CE / FCC / RoHS

Full specification

Taken from the manufacturer's own datasheet, with the source linked.

Brand / ManufacturerFingerTec
Device typeColour-screen fingerprint, RFID and password door access and time attendance terminal (master unit)
Verification methodsFingerprint (1:1 and 1:N), card, password and combinations
Fingerprint capacity10,000 templates
Card capacity10,000
Transaction log200,000
Display3.5 inch 65K colour TFT screen supporting images, corporate adverts, screensavers, photo ID and personalised short messages
CommunicationTCP/IP, RS232, RS485, USB flash disk. Optional WiFi, GPRS and 3G modules. Baud 9600-115200. Wiegand 26-bit in and out
Access controlEM lock driving output via relay NO / NC, built-in siren plus optional external alarm, anti-passback, time zones and shift support, work codes and shortcut keys, 15 languages
Card typesRFID 64-bit 125 kHz. MIFARE MF1S50 / S70 13.56 MHz and HID 1325 26-bit 125 kHz made to order
Power supplyDC 12V / 3A
Operating temp.0 to 45 C, humidity 20-80%
Dimensions200 x 56 x 160 mm, ABS
SoftwareIngress / TCMS V3
NOTELegacy generation but still documented on fingertec.com.

Legacy generation but still documented on fingertec.com.

Where this data comes from

Every specification here is checked against the manufacturer's own document before it goes live.

Common questions

How many employees does the FingerTec Q2i hold?
The FingerTec Q2i stores up to 10,000 enrolled records on the device, with a 200,000-punch transaction log. We check your headcount and peak-minute traffic before recommending it.
How does the FingerTec Q2i connect?
It supports TCP/IP, Wi-Fi, RS-485, RS-232, Wiegand, USB and 4G / cellular. In UAE installations we normally run it on wired Ethernet, with Wi-Fi kept as the fallback where cabling is impractical.
What software runs the FingerTec Q2i?
Ingress / TCMS V3. We connect the attendance data through to payroll and produce a WPS-ready export, so the punches become a payable file rather than a report someone has to retype.
Do you install and support the FingerTec Q2i across the UAE?
Yes. We supply, install, configure, train your team and support it across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain. Call +971 54 707 9900 for a fixed written quote.

Is the FingerTec Q2i the right fit for your site?

Send us your headcount and how many doors you need covered. We come back with the right specification and a fixed written quote, free of charge.

Request your free quote

A specialist replies within 2 working hours.

We never share your details. No spam, ever.