
Time attendance terminal
FingerTec TA100C in the UAE
The FingerTec TA100C is a time attendance terminal from FingerTec, using fingerprint, rfid card and pin or password as the credential. It stores 8,000 fingerprints on the device itself. It connects over TCP/IP, Wi-Fi, RS-485, RS-232, USB and 4G / cellular. It runs with TCMS V3 bundled, third-party SDK integration, BioBridge VX 9.0 / VX 10.0 algorithm.
- Manufacturer
- FingerTec
- Category
- Time attendance terminal
- Credentials
- Fingerprint · RFID card · PIN or password
- Capacity
- 8,000 fingerprints
- Connectivity
- TCP/IP · Wi-Fi · RS-485 · RS-232 · USB · 4G / cellular
Where this unit fits
- Remote sites and vehicles with no fixed network to plug into
- 800 MHz processor, 256 MB flash plus 128 MB SDRAM
- Non-coated optical scanner, any-angle placement, verification under 1 s, FAR under 0.0001%
- Work codes and short message display
- PUSH technology for TimeTec TA cloud
- 15+ terminal languages
Full specification
Taken from the manufacturer's own datasheet, with the source linked.
| Brand / Manufacturer | FingerTec |
|---|---|
| Device type | Fingerprint time attendance terminal with colour multimedia screen |
| Verification methods | Fingerprint (1:1 and 1:N) and password. No card reader on this variant, see the TA100CR |
| Fingerprint capacity | 8,000 templates |
| Transaction log | 200,000 |
| Display | 3.0 inch 65K colour TFT screen with photo ID, short messaging and voice |
| Communication | TCP/IP, USB disk. Optional RS232, RS485, WiFi and GPRS. Baud 9600 to 115200 |
| Access control | Internal and external siren output. This is a time attendance device, no published access control spec |
| Power supply | DC 5V / 2A |
| Operating temp. | 0 to 45 C, humidity 20-80% |
| Dimensions | 190 x 52 x 140 mm, ABS surface |
| Software | TCMS V3 bundled, third-party SDK integration, BioBridge VX 9.0 / VX 10.0 algorithm |
| NOTE | Legacy generation (TCMS V3 / BioBridge VX) but still in the FingerTec catalogue with no discontinuation marking. |
Legacy generation (TCMS V3 / BioBridge VX) but still in the FingerTec catalogue with no discontinuation marking.
Where this data comes from
Every specification here is checked against the manufacturer's own document before it goes live.
Common questions
- How many employees does the FingerTec TA100C hold?
- The FingerTec TA100C stores up to 8,000 enrolled records on the device, with a 200,000-punch transaction log. We check your headcount and peak-minute traffic before recommending it.
- How does the FingerTec TA100C connect?
- It supports TCP/IP, Wi-Fi, RS-485, RS-232, USB and 4G / cellular. In UAE installations we normally run it on wired Ethernet, with Wi-Fi kept as the fallback where cabling is impractical.
- What software runs the FingerTec TA100C?
- TCMS V3 bundled, third-party SDK integration, BioBridge VX 9.0 / VX 10.0 algorithm. We connect the attendance data through to payroll and produce a WPS-ready export, so the punches become a payable file rather than a report someone has to retype.
- Do you install and support the FingerTec TA100C across the UAE?
- Yes. We supply, install, configure, train your team and support it across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain. Call +971 54 707 9900 for a fixed written quote.
What buyers compare it with
Time attendance terminals
Is the FingerTec TA100C the right fit for your site?
Send us your headcount and how many doors you need covered. We come back with the right specification and a fixed written quote, free of charge.
Request your free quote
A specialist replies within 2 working hours.





