How does the ZKTeco KR602E connect?

It supports Wiegand. In UAE installations we normally run it on wired Ethernet, with Wi-Fi kept as the fallback where cabling is impractical.

Can the ZKTeco KR602E be installed outdoors in the UAE?

The manufacturer rates it IP64, solid epoxy potted, ABS + PC textured housing, with an operating range of -10 to +65 C (ZKTeco product page also lists -20 to 65 C), humidity 10-90% RH non-condensing. We still specify a shade hood on elevations that take direct midday sun, which extends screen and sensor life.

Do you install and support the ZKTeco KR602E across the UAE?

Yes. We supply, install, configure, train your team and support it across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain. Call +971 54 707 9900 for a fixed written quote.

Access control reader ZKTeco KR602E access control reader

Access control reader

ZKTeco KR602E in the UAE

The ZKTeco KR602E is a access control reader from ZKTeco, using rfid card and pin or password as the credential. It connects over Wiegand. Environmental rating: IP64, solid epoxy potted, ABS + PC textured housing.

Manufacturer: ZKTeco
Category: Access control reader
Credentials: RFID card · PIN or password
Connectivity: Wiegand

WhatsApp (Quickest)Get a fixed written quote

Download the datasheet (PDF)972 KB

Where this unit fits

Adding a second read point so one door records both entry and exit
Slotting into an access control panel you already own

Read range up to 10 cm, reading time under 300 ms
Keypad allows card + PIN or PIN-only access
Solid epoxy potting and reverse polarity protection
External LED and buzzer control inputs

Full specification

Taken from the manufacturer's own datasheet, with the source linked.

Brand / Manufacturer	ZKTeco
Device type	Waterproof Wiegand RFID proximity card reader with keypad (KR600 series, square form factor)
Verification methods	125 kHz EM proximity card plus PIN via keypad
Display	None. Red and green LEDs plus beeper
Communication	Wiegand output, 26-bit default on the -E (EM) variant
Access control	Slave reader for ZKTeco access panels such as the C3 series and for third-party Wiegand controllers. External LED and buzzer control ports
Card types	125 kHz EM on KR602-E. 13.56 MHz Mifare / IC on the KR602-M variant, 34-bit Wiegand
Power supply	DC 6-14V, max 70 mA (user manual states DC 12V, operating current under 100 mA)
Operating temp.	-10 to +65 C (ZKTeco product page also lists -20 to 65 C), humidity 10-90% RH non-condensing
Dimensions	86 x 86 x 20 mm
Protection rating	IP64, solid epoxy potted, ABS + PC textured housing
Note	The manual quotes an effective read distance of 0-5 cm while the datasheet says up to 10 cm.

The manual quotes an effective read distance of 0-5 cm while the datasheet says up to 10 cm.

Download the datasheet (PDF)WhatsApp (Quickest)

Where this data comes from

Every specification here is checked against the manufacturer's own document before it goes live.

Common questions

How does the ZKTeco KR602E connect?: It supports Wiegand. In UAE installations we normally run it on wired Ethernet, with Wi-Fi kept as the fallback where cabling is impractical.
Can the ZKTeco KR602E be installed outdoors in the UAE?: The manufacturer rates it IP64, solid epoxy potted, ABS + PC textured housing, with an operating range of -10 to +65 C (ZKTeco product page also lists -20 to 65 C), humidity 10-90% RH non-condensing. We still specify a shade hood on elevations that take direct midday sun, which extends screen and sensor life.
Do you install and support the ZKTeco KR602E across the UAE?: Yes. We supply, install, configure, train your team and support it across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain. Call +971 54 707 9900 for a fixed written quote.